AirKing Lite 10ft trampoline with safety enclosure

Features

		The AirKing Lite 10ft trampoline features 64 high bounce springs, 141mm long (Fully extended 210mm)and 25mm in diameter. This is a combination is ideal for lighter jumpers and will ensure that the little ones get plenty of bounce.
		The Soft Touch mat is polyprolylene-woven to provide elasticity without stretching - it works together with the springs to give fantastic and predictable bounce characteristics. It is also easy-draining and UV-resistant for enhanced durability and is air-permeable which again improves the bounce.
		Tough V-rings are used to attach the springs to the mat, and 10 rows of perimeter stitching give it great strength and a high level of built-in redundancy to make your trampoline last longer.
		Closed cell foam is used for the spring padding. This excludes water to provide both better protection and increased durability. The padding extends over the edge of the mat and wraps over the outer frame for safety.
		The tubular steel frame is constructed of 38mm tubing and 1.6mm steel for ultimate strength and durability. It is also hot galvanized both inside and out for extra protection.
		The safety enclosure is attached using moulded connectors rather than U-shaped ones for greater security and they come with rubber protectors for safety. The enclosure netting can be woven into the V-rings underneath the trampoline to ensure that there are no possible gaps.

Specifications

Trampoline
• Height: 70cm
• Weight: 41.1kg
• Maximum User Weight: 120kg

Frame
• Diameter: 10ft
• 38mm diameter tubing
• 1.6mm steel construction
• Hot galvanized (inside and out)
• T-bar 'no weld' connector system

Springs
• Number: 64
• Length: 141mm
• Diameter: 25mm
• Gauge: 3.2mm
• Fully extended: 210mm

Soft Touch mat
• Jump diameter: 8' 8"
• Central target area printed in white
• Polypropylene-woven
• UV-resistant
• Easy-draining
• V-ring attachments with 10 rows of perimeter stitching

Legs
• Number: 8
• Curved support base provides impact resistance and greater durability
• 38mm diameter tubing
• 1.6mm steel construction
• Hot galvanized (inside and out)

Safety Enclosure
• 4mm mesh polyester webbing
• Height: 2.48m
• 1.3mm steel tubing (25.4mm diameter)
• Supports are foam padded
• Toggle fastening door for easy and secure access
• Netting can be woven into the edge of the mat for increased security

The trampoline is flat packed for easy assembly (tools and simple instructions provided - estimated time 1 hour. We recommend building the trampoline with 2 or 3 people for easier construction.

PLEASE NOTE: Colours & design may vary from those pictured

Warranty
The frame comes with a 5 year warranty against failure due to rust. The springs, mat, padding, cover and enclosure come with a 12 month RTB warranty. If any fault develops during this period as a result of normal use, just send it back to us and we will either repair or replace it. See Warranty and returns for further details.