AirKing Octagonal 10ft trampoline with safety enclosure

Features

	The AirKing Octagonal 10ft trampoline features 56 high bounce springs, 177mm long (Fully extended 320mm) and 25mm in diameter. This is a combination that has been tested through experience and gives superb bounce - results show a very even and predictable bounce curve with fantastic lift. Thanks to the octagonal shape - it also completely eliminates the dreaded "no bounce zone" and gives superior performace comparded to the equivalent circular trampoline.
	The Soft Touch mat is polyprolylene-woven to provide elasticity without stretching - it works together with the springs to give fantastic and predictable bounce characteristics. It is also easy-draining and UV-resistant for enhanced durability and is air-permeable which again improves the bounce.
	Tough V-rings are used to attach the springs to the mat, and 10 rows of perimeter stitching give it great strength and a high level of built-in redundancy to make your trampoline last longer.
	Closed cell foam is used for the spring padding. This excludes water to provide both better protection and increased durability. The padding extends over the edge of the mat and wraps over the outer frame for safety.
	The tubular steel frame is constructed of 38mm tubing and 2.5mm steel for ultimate strength and durability. It is also hot galvanized both inside and out for extra protection.
	The safety enclosure is attached using moulded connection clips rather than U-shaped ones for greater security and they come with rubber protectors for safety. The enclosure netting can be woven into the V-rings underneath the trampoline to ensure that there are no possible gaps.

Specifications

Trampoline
• Height: 96cm
• Weight: 61kg
• Maximum User Weight: 24stone

Frame
• Size: 9ft
• 51mm diameter tubing
• 2mm steel construction
• Hot galvanized (inside and out)
• T-bar 'no weld' connector system

Springs
• Number: 56
• Length: 177mm
• Diameter: 25mm
• Gauge: 3.2mm
• Fully extended: 320mm

Soft Touch mat
• Jump area: 9ft
• Central target area printed in white
• Polypropylene-woven
• UV-resistant
• Easy-draining
• V-ring attachments with 10 rows of perimeter stitching

Legs
• Number: 8
• Curved support base provides impact resistance and greater durability
• 38mm diameter tubing
• 2mm steel construction
• Hot galvanized (inside and out)

Safety Enclosure
• 4mm mesh polyester webbing
• Height: 2.66m
• 1.3mm steel tubing (25.4mm diameter)
• Supports are foam padded
• Toggle fastening door for easy and secure access
• Netting can be woven into the edge of the mat for increased security

The trampoline is flat packed for easy assembly (tools and simple instructions provided - estimated time 1 hour. We recommend building the trampoline with 2 or 3 people for easier construction.

PLEASE NOTE: Colours & design may vary from those pictured

Warranty
The frame comes with a 5 year warranty against failure due to rust. The springs, mat, padding, cover and enclosure come with a 12 month RTB warranty. If any fault develops during this period as a result of normal use, just send it back to us and we will either repair or replace it.