 | |
The AirKing Pro 12ft trampoline features 96 high bounce springs, 178mm long and 25mm in diameter. This is a combination that has been tested through experience and gives superb bounce - results show a very even and predictable bounce curve with fantastic lift. |
| |
 | |
The Soft Touch mat is polyprolylene-woven to provide elasticity without stretching - it works together with the springs to give fantastic and predictable bounce characteristics. It is also easy-draining and UV-resistant for enhanced durability and is air-permeable which again improves the bounce. |
| |
 | |
Tough V-rings are used to attach the springs to the mat, and 10 rows of perimeter stitching give it great strength and a high level of built-in redundancy to make your trampoline last longer. |
| |
 | |
Closed cell foam is used for the spring padding. This excludes water to provide both better protection and increased durability. The padding extends over the edge of the mat and wraps over the outer frame for safety. |
| |
 | |
The tubular steel frame is constructed of 38mm tubing and 2mm steel for ultimate strength and durability. It is also hot galvanized both inside and out for extra protection. The weakest parts of a trampoline frame are always the weld points, so this frame has been constructed with a T-bar connector system between the frame uppers and the leg supports - this means the whole frame is constructed with no welds at all. |
| |
 | |
The safety enclosure is attached using moulded connection clips rather than U-shaped ones for greater security and they come with rubber protectors for safety. The enclosure netting can be woven into the V-rings underneath the trampoline to ensure that there are no possible gaps. |
| |
