|
|
|
The Air King is a well made and highly specified domestic trampoline. 80 springs and a unique polypropylene-woven Soft Touch mat give excellent bounce characteristics, supported by a strong 1.6mm tubular steel frame with advanced T-bar connectors and high-security V-ring fittings. The mat is easy-draining and air-permeable for a better response, and 10 rows of perimeter stitching ensure long life and peace of mind.
The safety enclosure can be woven into the edge of the mat at the base to provide additional security (i.e. there are no potential gaps which a small child could get through), and is fitted with toggle fastenings for easy and secure closure.
The Air King Pro comes with a free cover and ladder and can be delivered the next working day if payment is received before noon..
Features
 | |
The AirKing 14ft trampoline features 80 high bounce springs, 178mm long and 25mm in diameter. This is a combination that has been tried and tested and gives excellent bounce characteristics for all users, with a very even and predictable bounce curve and high lift. |
| |
 | |
The Soft Touch mat is polyprolylene-woven to provide elasticity without stretching - it works together with the springs to give fantastic and predictable bounce characteristics. It is also easy-draining and UV-resistant for enhanced durability and is air-permeable which again improves the bounce. |
| |
 | |
Tough V-rings are used to attach the springs to the mat, and 10 rows of perimeter stitching give it great strength and a high level of built-in redundancy to make your trampoline last longer. |
| |
 | |
Closed cell foam is used for the spring padding. This excludes water to provide both better protection and increased durability. The padding extends over the edge of the mat and wraps over the outer frame for safety. |
| |
 | |
The tubular steel frame is constructed of 38mm tubing and 1.6mm steel for ultimate strength and durability. It is also hot galvanized both inside and out for extra protection. The weakest parts of a trampoline frame are always the weld points, so this frame has been constructed with a T-bar connector system between the frame uppers and the leg supports - this means the whole frame is constructed with no welds at all. |
| |
 | |
The safety enclosure is attached using moulded connectors rather than U-shaped ones for greater security and they come with rubber protectors for safety. The enclosure netting can be woven into the V-rings underneath the trampoline to ensure that there are no possible gaps. |
| |
Specifications
Trampoline
• Height: 85cm
• Weight: 51.5kg
Frame
• Diameter: 12ft
• 38mm diameter tubing
• 1.6mm steel construction
• Hot galvanized (inside and out)
• T-bar 'no weld' connector system
Springs
• Number: 80
• Length: 178mm
• Diameter: 25mm
• Gauge: 3.2mm
Soft Touch mat
• Jump diameter: 10' 4"
• Central target area printed in white
• Polypropylene-woven
• UV-resistant
• Easy-draining
• V-ring attachments with 10 rows of perimeter stitching
Legs
• Number: 8
• Curved support base provides impact resistance and greater durability
• 38mm diameter tubing
• 1.6mm steel construction
• Hot galvanized (inside and out)
Safety Enclosure
• 4mm mesh polyester webbing
• Height: 2.66m
• 1.3mm steel tubing (25.4mm diameter)
• Supports are foam padded
• Toggle fastening door for easy and secure access
• Netting can be woven into the edge of the mat for increased security
The trampoline is flat packed for easy assembly (tools and simple instructions provided - estimated time 1 hour. We recommend building the trampoline with 2 or 3 people for easier construction.
Warranty
The frame comes with a 5 year warranty against failure due to rust. The springs, mat, padding, cover and enclosure come with a 12 month RTB warranty. If any fault develops during this period as a result of normal use, just send it back to us and we will either repair or replace it. See Warranty and returns for further details.
|
|
| |
WAS: |
£319.99
|
| |
Now Only: |
£189.99
including VAT and Free Delivery
|
|
|
|
|
